Bicycle lamp front rear LED light bicycle lighting for bicycle front rear Strong 900lm Alogy black red

Powerful bicycle light

A durable and strong bicycle front light from the Alogy brand is an essential bicycle accessory for every cyclist traveling on the road.

The lamp has 3 LEDs (Light Emitting Diode), which guarantee a wide and distant illumination, high brightness of the emitted light and a wide scattering angle .

The LEDs used are a very bright and energy-saving light source compared to traditional light sources.

The lamp emits as much as 900 lumens , thanks to which the road will be perfectly illuminated, and we will be safe and clearly visible after dark.

IPX65 and IPX4 waterproof

The FRONT light has a waterproof design with IPX65 technology, so it can be used even in bad weather.

In addition, the lamp is made of a strong aluminum alloy , resistant to weather conditions and shocks.

The REAR light has a waterproof structure compliant with the IPX4 standard. This means that it is protected against rain and water splashes from all directions.

LED diodes indicating the charge level

On the side of the lamp there are 4 blue LEDs that indicate the battery charge status - this solution will prevent us from being surprised by a discharged battery.

Next to the diode there is a USB-C Type C input for connecting the charging cable and an on/off switch for the lamp.

• 4 diodes - 100 batteries
• 3 diodes - 75 batteries
• 2 diodes - 50 batteries
• 1 diode - 25 batteries

Simple USB charging

The lamp has a built-in high-capacity 2000mAh battery .

The lamp is charged using the USB-C cable that is included in the set.

The lamp can be charged via cable using a standard wall charger, car charger, laptop or power bank.

Modes of operation

The lamp has 4 operating modes:

1. 75 power - 2 600lm diodes light up

2. 50 power - 1 diode (middle one) lights up, 400lm

3. 100 power - all three 900lm diodes are lit

4. Stroboscope

Compact and light design of the lamp

The small dimensions and weight of 145g of the lamp ensure convenience and comfort while driving.

• Length: 9.5cm
• Width: 4.1cm
• Thickness: 3.3cm

Simple front light installation

This is an ideal product for cyclists who like simple solutions.

Lamp installation:

1. Unscrew the cap from the clamp and adjust the width of the clamp to the width of the handlebar
2. Attach the clamp firmly and stably so that it does not move
3. Insert the lamp (the lamp has a special cutout at the bottom) into the upper part located on the bracket
4. Move the lamp to the center and tighten the screw from the bottom
5. To remove the lamp, simply slide it out.

Quick and universal rear light installation

The installation of the Alogy lamp is easy and quick , and most importantly, it does not require the use of tools.

The handle with a non-slip silicone band ensures stability and easy attachment to a bicycle, scooter, stroller, bicycle helmet or backpack.

Trouble-free assembly makes using the lamp convenient and tailored to the user's various needs.

Strong red light

The Alogy lamp uses a light source in the form of a red LED, emitting light with a power of 50 lumens.

It has three lighting modes: stroboscopic, slow flashing and continuous mode, which significantly increases the user's visibility and safety during night cycling trips.

Thanks to these functions, the lamp effectively attracts the attention of other road users.

The Alogy lamp is powered by two CR2032 batteries, included in the set, which ensure the lamp's operation for up to 50 hours.

Certificates

• CE certificate - proves that the product complies with European requirements regarding safety, health, environmental and consumer protection.
• The ROHS certificate confirms that the product meets certain limits for harmful substances.

Alogy  is a dynamic  Polish brand that stands out on the market thanks to its advanced innovation and attention to every detail.

With a passion for creating modern solutions for everyday accessories,  Alogy  consistently aims to provide customers with a unique experience that combines  excellent quality, original design  and  functionality  at  the highest level.

We are proud that our brand not only provides  exceptional quality products , but also creates  positive  shopping experiences .

Our goal  is to build  long-term relationships  with our clients, who are the heart and soul of our business. Thanks to their opinion and support, we are able to constantly develop and obtain

Frequently Asked Questions

1. What bikes is the light compatible with?

   The rear light has a universal rubber mounting strip. Front light compatible with any bike (mountain/MTB, road, city, trekking, electric, etc.). A necessary condition is the thickness of the handlebar, which must be between 2.2cm and 2.5cm.

2. Is the lamp waterproof?

   The front lamp is waterproof at IPX65, while the rear lamp is IPX4. This resistance makes the lamps resistant to rain and water splashes, which allows them to be used without any problems in various weather conditions.

3. How many light modes does the lamp have?

   The front light has as many as 4 modes: 1st mode is 75 light, 2nd mode is 50, 3rd mode is 100, 4th mode is stroboscope (pulsating light). The rear light has three lighting modes: stroboscopic, slow flashing and continuous mode.

Everything at your fingertips!

Check out our other offers and choose the necessary accessories for yourself.

Remember! We offer a number of accessories such as: tempered glass, holders, car chargers, FM transmitters, cables and headphones.